Shop Genie Parts
|
|
|
| 108035.0007 Genie Excelerator 20' coaxial antenna kit | 108398 Genie Visor Clip | 18004B Motor Starting Capacitor 50-60 MFD |
| 108035.0007 Genie Excelerator 20' coaxial antenna kit Genie Antenna Kit (20') - Part #108035.0007 For use with Antenna Kit (108035.0005) Extends wip antenna out an extra 20 feet from the gate operator | 108398 Genie Visor Clip for newer Intellicode remotes (rounded Top) | 18004B Motor Starting Capacitor 50-60 MFD |
$48.00 | $6.25 | $17.90 |
|
|
|
| 18295A04 Genie Header Bracket for T-Rail Units | 18586A04 Pin for Genie T-Rail Header Bracket | 20374T Genie Safety Sensors (Sensors Only) |
18295A04 Genie Header Bracket for T-Rail Units | 18586A04 Pin for Genie T-Rail Header Bracket | 20374T Genie Safety Sensors (Sensors Only) -Sensors Only- No Brackets, Wire or Fasteners included These Safety Sensors are compatible with all Genie and Overhead Door Models except those that have a three pin connector at the motor head. |
$3.95 | $0.79 | $26.75 |
|
|
|
| 20399R Genie Rolling Code Sequencer Board (30901S) | 20449R Genie Chain Drive Gear Case Cover | 20456R Genie Pulley Support Assembly Kit |
20399R Genie Rolling Code Sequencer Board (30901S) | 20449R Genie Chain Drive Gear Case Cover | Complete Front Clip For Genie & Overhead Door T-Rail |
$65.80 | $5.90 | $10.50 |
|
|
|
| 20463R Genie 7' Belt & Bullet Assembly | 20463S Genie 8' Belt & Bullet Assembly | 20467R Genie Limit Switch (Chain Glide Low Profile) |
20463R 7' Belt and Bullet Assembly for Genie Stealth Garage Door Openers
| 20463S 8' Belt and Bullet Assembly for Genie Stealth Garage Door Openers
| 20467R Genie Limit Switch (Chain Glide Low Profile)
|
$74.95 | $79.95 | $11.97 |
|
|
|
| 26966D Genie Chain Drive Idler Pully (T-Rail-FULL CHAIN) | 27145A Genie Lens Cover for PMX Chain Drive / Belt Drive Models | 27191A Genie Sprocket for 7' and 8' Chain Drive (10-Tooth) |
Chain Drive Pulley
| 27145A Genie Lens Cover for PMX Chain Drive / Belt Drive Models | Fits all Genie 7' and 8' Chain Drive Openers both T-Rail and Chanel Rail |
$4.90 | $15.95 | $9.85 |
|
|
|
| 27222A Sprocket Bushing | 27290A Genie Sprocket for 10' Chain Drive (12-Tooth) | 27474C Battery Cover for Genie GWK Keypads |
27222A Sprocket Bushing for Genie Chain Drive or Belt Drive Channel Rails. Fits the following models: PMX700, PMX1200, GPS00-IC, GPS1200-IC | Fits all Genie 10' Chain Drive Openers both T-Rail and Channel Rail | 27474C Battery Cover for Genie GWK Keypads |
$1.40 | $14.75 | $6.75 |
|
| |
| 27576A Genie Visor Clip (fits GPT90-1) old style | 28021A Genie Belt Drive Sprocket (10'-12' Channel Rail) | 29027A Genie Sprocket Saddle |
| 27576A Genie Visor Clip Works on older box type Genie remotes | 28021A Genie Belt DFits the following models:
PMX700, PMX1200, GPS00-IC, GPS1200-ICrive Sprocket (10'-12' Channel Rail) | Works on all Genie T-Rail Chain Drive and Belt Drive Models |
$6.25 | $23.90 | $9.80 |
|
|
|
| 30322A Replacement Bumper for Coupler Assembly | 30323A Opto Luctor Wheel. Screw on type. | 31057R Opto Luctor |
30322A Replacement Bumper for Coupler Assembly. Works with 30257T Coupler Assembly | 30323A Opto Luctor Wheel. Screw on type. For use with 31057R Opto Luctor Wheel | 31057R Opto Luctor for Genie Screw Drive Openers. Old Part # 31056A |
$3.75 | $2.70 | $14.25 |
|
|
|
| 33221A Genie Motor Shaft Bushing | 33353A Genie Chain Glide Drive Shaft | 33523R Screw Drive Rail Extension Kit for 8' Doors |
| 33221A Genie Motor Shaft Bushing | 33353A Drive shaft for all Genie Chain Glide Openers | Extends standard rail for 7' door to an extended rail for 8' tall garage doors. |
$4.37 | $6.95 | $45.90 |
|
|
|
| 33744A04-2 Rail Clamps for Genie Chain Glide Models (1-Pair) | 33950R Genie Excelerator Open limit Switch | 33950S Genie Close Limit Switch for Excelerator Openers |
Rail Clamps (1-Pair) for Genie Chain Glide Garage Door Openers.
| 33950R Genie Excelerator Open limit Switch Open Limit switch for all Genie Excelerator Garage Door Openers | 33950S Genie Close Limit Switch for Excelerator Openers. Close Limit switch for all Genie Excelerator Garage Door Openers |
$7.95 | $10.50 | $10.50 |
|
|
|
| 34019R / 36600R.S Genie Sequencer/Control Board (Excelerator) | 34019T Genie Excerator Coaxial Sequencer Control Board | 34106R Genie Excelerator 3 pc. Screw Drive Rail Assembly |
34019R / 36600R.S Genie Sequencer/Control Board (Excelerator) Original Genie part DC Screw Drive Controller Board For ALL Genie Excelerator Garage Door Openers | Genie Excelerator coaxial control board 34019T F-Type coaxial antenna connection for long range capabilities Replacement Control Board for Genie excelerator garage door openers only Original Genie Manufacturer Replacement Part | Genie Excelerator 3pc. Rail assembly
|
$58.33 | $43.20 | $98.97 |
|
|
|
| 34463R Genie Excelerator Motor Control Board (pre Jan. 2007) | 34540A Rail Strap for Genie Excelerator Models | 34879A-2 Genie Photo Cell Brackets (Set of 2) |
| 34463R Genie Excelerator Motor Control Board (pre Jan. 2007). Works on the following models manufactured prior to Jan. 2007: PRO99, PRO9900, H8000D, H8000D-2K, ISD Series | 34540A Rail Strap. Fits all Genie Ecxelerator Models only. Secures front end of railo to the header Bracket. | 34879A-2 Genie Photo Cell Brackets (Set of 2)
|
$62.00 | $4.95 | $7.99 |
|
|
|
|
| 35048R Safety Beam Sensor Replacement Kit | 35421A Header Bracket for Genie Openers. | 35426A Genie Transformer. |
35048R Universal Safety Beam Sensor Replacement Kit Includes Brackets, Wires, Sensors and Installation Instructions Universal Sensors Work with all Genie Products | 35421A Header Bracket for Genie Openers. Fits all Genie Screw Drive, Chain Glide and Excelerator models. Secures Track to Header above garage door. | Genie Transformer |
$41.70 | $3.25 | $17.75 |
|
|
|
| 35612A Genie Docking Station (GICT390 Remotes) | 35629A Genie GWKP Keypad Cover (Cool Grey) | 36190S.S / 20380S.S Genie Control Board (Intellicode) 6 Terminal |
35612A Genie Docking Station (GICT390 Remotes)
| 35629A Genie GWKP Keypad Cover Only (Cool Grey) | 36190S.S / 20380S.S Genie Control Board (Intellicode) 6 Terminal Genie Intellicode Garage Door Opener Receiver/Sequencer |
$4.95 | $9.95 | $67.42 |
|
|
|
| 36220A.S (28016A) Genie Belt Drive Sprocket | 36254R Genie Chain Drive Carriage Assembly | 36286A (35234A) Genie Lens Cover (Retail & Pro Models) |
36220A.S (28016A) Genie Belt Drive Sprocket (7'6"-8' Channel Rail) 18 Tooth Fits the following models: PMX700, PMX1200, GPS00-IC, GPS1200-IC | 36254R Genie Chain Drive Carriage Assembly for T-Rail Machines Replaces part # 20438R. Replacement for all Genie chain drive openers with steel T-Rail Assemblies Does Not include Innerslide Part # 25605R. Must be installed with innerslide | 36286A (35234A) Genie Lens Cover (Retail & Pro Models)
|
$23.90 | $24.90 | $15.95 |
|
|
|
| 36451A Genie Chain Drive Pulley Assembly (Chainlift or ReliaG) | 36521S.S (20437R / 34375R) Genie Intellicode Internal Receiver | 36543A Genie Carriage for Chainlift and Belt Lift Models |
36451A Genie Chain Drive Pulley Assembly (Chainlift or ReliaG)
| 36521S.S (20437R /34375R) Genie Intellicode Internal Receiver
| Fits the following Chainlift and Beltlift models: 1022, 1024, 1026, 2024, 2026 ReliaG 800, QuietLift 800, QuietLift 800N and Legacy 800 |
$14.95 | $49.95 | $18.95 |
|
|
|
| 36605A Genie Belt Drive Pulley | 37028C Genie Control Board for Model 2022 | 37029A Genie Lens Cover for 2022, 2024, 2042 |
36605A Genie Belt Drive Pulley for models 1022, 1024, 1042, 2022, 2024, 2042 | Control Board for Genie 1022 Chain / Belt Drive Openers | ??Genie Lens Covert for ReliaG 800 Models: 2022, 2024, 2042 |
$8.95 | $76.95 | $16.95 |
|
|
|
| 37221R (GSTB-BX) Safety Sensor Kit | 37222R Genie GBWC-BX Deluxe Series III Wall Console | 8115B17 Speed Nut for T-Rail Header Bracket Pin |
37221R (GSTB-BX) Genie Safe-T Beam Sensor Kit.
| For Series III Genie Garage Door Operners Only. DOES NOT WORK WITH SERIES II CONTROLS | 8115B17 Speed Nut for T-Rail Header Bracket Pin |
$36.97 | $29.65 | $0.75 |
|
|
|
| A23 12V Battery | CR2032 3 Volt Battery | GIC390 (20440R) Genie Intellicode Universal Receiver |
A23 12 Volt Batter Replacement for Garage Door Remotes Check the battery in your remote before ordering. | Replacement 3 Volt Battery For some garage door remotes. Check your battery to make sure this is the one to order | 20440R (GIC390) Genie Intellicode Universal Receiver Converts any garage door opener to the newest genie frequency. |
$6.75 | $5.75 | $29.90 |
|
|
|
| GIR390-1T Genie Intellicode Receiver with one GIT-1 Remote | GIRUD-1T Genie Universal Dual Frequency Conversion Kit | 19792A04 Replacement Door Bracket |
| GIR390-1T Genie Intellicode Receiver with one GIT-1 Remote Convert old garage door openers to the new Intellicode code rotating technology for a fraction of the cost of replacing the entire system | GIRUD-1T Genie Universal Dual Frequency Conversion Kit Kit Includes: One Genie GICT390-3 3-button compact remote One receiver One transformer | GENIE 19792A04 Replacement Door Bracket Works with all Genie and Overhead Door Models. Attaches Door Arm to Door |
$52.40 | $59.95 | $6.70 |
|
|
|
| 19863R Screw Drive Clip and Collar Rail Connector Set | 19988A Genie Capacitor for 1/2HP Openers | 20113R Screw Drive Limit Switch |
GENIE 19863R Screw Drive Clip and Collar Rail Connector set For Genie 3 Piece Rail Screw Drive Models Works with all late model screw drive openers | 19988A Genie Capacitor for 1/2HP Openers
| GENIE 20113R Screw Drive Limit Switch For Genie and Overhead Door Screw Drive and track drive Models only Replaces Up or Down Switch |
$5.90 | $17.85 | $7.20 |
|
|
|
| 36190T.S (20380R.S)Genie Control Board(Intellicode) | 20386R (31184R) Genie Sequencer Board | 20462R Genie Belt Drive Carriage Assembly |
36190T.S Replacement Genie Intellicode Garage Door Opener Logic Receiver/Circuit Board Replaces the following Boards: 20380R (33001R/34374R) | 20386R (31184R) Genie Sequencer Board Compatible with ALL Genie IntellicodeTM Screw Drive Garage Door Opener from 1997 to current Replaces Older Genie Garage Door Opener Sequencer Circuit Board 20386R | GENIE 20462R Belt Drive Carriage Assembly For Genie and Overhead Door Belt Drive Models only Works with all belt drive models |
$77.95 | $49.90 | $22.10 |
|
|
|
| 24701R Genie external chain drive limit switch (Chain Dog) | 25605R Genie Inner Slide for Chain Drive Models | 27092A Drive-Limit Worm Gear |
24701R Genie external chain drive limit switch (Chain Dog) Genuine Genie part, comes 3 per pack | 25605R Genie Inner Slide for Chain Drive Models Works with all Genie chain drive models with t-rail assembly Mounts on chain with bolts (included) | GENIE 27092A Drive-Limit Worm Gear For Genie and Overhead Door PMX and GPS Stealth Series Openers with Internal Limit Cam |
$9.95 | $8.90 | $7.00 |
|
|
|
| 27096A Chain Drive Gear | 27884W Wall Console | 2PGBWIRE 25' Roll of 2 Prong Bell Wire |
GENIE 27096A Chain Drive Gear Only works with Genie PMX Series Chain or Belt Drive Openers or GCG or PCG or Chain Glide Models | 27884W Wall Console. Only works with 12 dip switch openers THIS ITEM IS DISCONTINUED! REPLACEMENT: 34299R | GENIE 1 Roll of 2 Prong Bell Wire For Sensor Beams Works for all Safety Beam Sensors and Wall Consoles 25? of Wire per roll |
$11.60 | $29.90 | $8.80 |
|
|
|
| 30257T Coupler for Screw Drive Openers | 33355A Chain Drive Worm Gear | 37351R (34299R) Genie Intellicode wall console |
GENIE 30257T Coupler for Screw Drive Openers For Genie and Overhead Door Clutchless Screw Drive Models only Mounts on rear of opener rail | GENIE 33355A Chain Drive Worm Gear Only works with Genie Chain Glide Models This is the Nylon Replacement Worm Gear Only | 37351R (34299R) GPWC-BX Genie Intellicode wall console for Series II intellicode or code dodger openers only. 3 function Deluxe Wall Console with lighted buttons Deluxe Wall Console operates system from inside the garage |
$5.20 | $9.65 | $24.70 |
|
|
|
| 34322A Genie Replacement Light Socket | 34538R Chain Glide Up Limit Switch | 34538S Genie Chain Glide Down Limit Switch |
GENIE 34322A Replacement Light Socket Works with Most Genie and Overhead Door Models | 34538R Chain Glide Up Limit Switch 66" Length Wire Included | 34538S Genie Chain Glide Down Limit Switch 66" Length Wire included. |
$5.20 | $13.25 | $13.25 |
|
|
|
| 35035A Lens Cover Excelerator Retail Lens Cover | 35263R Chain Glide Carriage Assembly Retrofit upgrade | 36179R Carriage Assembly for Screw Drive Machines |
| 35035A Lens Cover Excelerator Retail Lens Cover | GENIE 35263R Chain Glide Carriage Assembly Retrofit Upgrade For all Genie and Overhead Door Chain Glide Models Replaces 33048R and 20432R Carriages | 36179R Carriage Assembly for Screw Drive Machines Works on all Genie Srew Drive Openers |
$12.90 | $25.40 | $18.90 |
| ||
| KEP-1 Universal Keyless Entry and Reciever Kit | ||
KEP-1 Universal Keyless Entry and Reciever Kit Offers convenient, secure garage entry without using a remote controller or key Installs on ANY garage door opener, no matter what brand Adds security and convenience - Easy installation | ||
$45.70 | ||
